A launch gets designed around one moment. The room gets chosen for how that moment will look. Then the product arrives on a pallet at a loading bay on the far side of the building, and the only way up to the room is a goods lift with a door barely over a metre wide.
Audio visual, or AV, is the screens and sound that carry the moment. Product launch AV requirements are easy to write as a kit list, and that is the wrong order. The shorter list is the one that decides the evening: what has to physically get into the room, and whether the product will still look like itself once the lighting is on it.
In short
- Check the route into the room before you commit to the room. One venue can offer a drive-in doorway into its halls and a goods lift with a door barely over a metre wide.
- The reveal is a single cue. Lighting, sound and screen change on the same instant, and one person has to call it.
- Lighting a product is not lighting a presenter. A fixture that flatters a face can misrepresent a colour the brand signed off.
- Each reveal happens once and it is photographed, so camera positions are decided with the lighting rather than after it.
Product launch AV requirements start at the loading door
For one day, the thing you are launching is freight. The route from the lorry to the spot it stands on has a narrowest point, and that point is the real constraint on the evening.
Some venues publish enough to work this out. Exhibition Centre Liverpool publishes vehicle doors of 4.9 metres high by 7 metres wide and a floor loading of two tonnes per square metre on its hall specification sheets. ExCeL London publishes drive-in doorways of 7.5 metres wide by 5 metres high into its event halls, and in the same document a goods lift serving the Platinum Suite with a door of 1.3 metres wide by 2.1 metres high. The drive-in doorway and the goods lift describe two different jobs in one building.
So the question for a venue is not whether access is good. It is which opening on the route is smallest, and what the floor will carry if the product sits on a plinth. Our crew needs the same answers for the staging and the screens, which is why it belongs in one brief.
The reveal is one cue, and the room has to hit it together
A cover lifting, a drape flying out, a screen going from black to the product, and the sound landing on the same frame. One cue with four things inside it. Somebody in the room holds the call.
This is where a split supply chain shows. If the lighting comes from one firm, the sound from another and the staging from a third, the reveal can be a handshake between crews who have not worked together, each owning a part of a single instant. Our position is plain: splitting audio visual, lighting and staging across suppliers moves the coordination risk onto you, and the reveal is the moment it arrives.
Plan for the room running more than once, too. On AllSaints’ SS24 show we ran a preview earlier in the day for key managers and head office staff, then the main evening show. Two audiences, and everything working in time for the earlier one. The running order carrying that is a technical document rather than a schedule, and we have set out what that means for an awards night.
Lighting a product is not the same as lighting a presenter
Stage lighting is specified to make people look right. A launch asks it to make an object look right. A brand has signed off a finish or a fabric, and the lighting decides whether the room sees that colour or a near miss.
One figure offered as reassurance is the colour rendering index, or CRI, which claims to describe how truthfully a light source shows colour. It is weaker than it looks. The United States Department of Energy, citing research on colour fidelity, refers to the index’s “widely acknowledged limitations”, notes that it penalises increases in the vibrancy of reds more strongly, because of the outdated models of vision behind the calculation, and says coarse averages of this kind are typically not enough.
So do not accept a figure on a specification sheet as proof your product will read true. Put the product itself, or at least its finish, under the fixtures at the technical rehearsal and look at it. Light emitting diode fixtures vary between manufacturers and ranges, so a rig built from two families can give you two whites on one object. The SS24 rig carried over 100 fixtures from Chauvet and Martin Lighting. At that scale the rig is a lighting design job rather than a hire list.
Each reveal happens once, and it is photographed
The photographs and the video outlive the evening. They can go to the trade press and the sales team, which makes camera positions part of the lighting plan.
A product lit hard from the front with a bright screen behind it reads fine to the eye and can turn into a silhouette in a photograph. Back light and edge light help separate an object from the content behind it. The reveal cannot be run again because a frame was missed, so anything that happens once gets a second camera on it.
We would rather know what the photographs are for before specifying any of it. Specifying kit before understanding what the event is for produces the wrong kit.
A raw space works, as long as it is specified as one
Some brands pick a space with a story in it rather than a room with a stage already in the corner. That is deliverable. It is also a different specification.
AllSaints’ SS24 show took place in an unused tram station in the Kingsway Tram Tunnels in London, and our account of it lists the conditions plainly: no power, no wifi, no phone signal, limited light, uneven floorspace, narrow layout and poor acoustics. The job accordingly carried rigging, power generation and power distribution alongside the lighting, audio and staging.
In a space like that, what a conference centre supplies becomes something somebody has to bring, and both the get-in, when equipment comes in and is rigged, and the de-rig at the far end get longer. None of that is a problem on paper. It is a problem on site.
Frequently asked questions
What does our AV supplier need to know about the product itself?
Its size and weight, and how it arrives and stays covered until the reveal. Then whether guests can touch it, and whether the finish and colour are signed off or still moving. That last answer sets the deadline for the screen content, because content made against a finish that then changes has to be made twice. It is also the answer that slips most easily.
Can a launch work in a venue with no power?
Yes, provided it is planned as a venue with no power from the beginning. Our AllSaints SS24 show, part of London Fashion Week, ran in an unused tram station with no power, no wifi and no phone signal, and the job carried power generation and distribution alongside the lighting and audio. A raw space asks for a longer get-in and a longer equipment list. We would plan a launch in one the same way.
Sources
- Exhibition Centre Liverpool · Hall specification sheets
- ExCeL London · Vital statistics, metric
- United States Department of Energy, Solid-State Lighting · Research compares measures of average color fidelity
Talk to us about your launch
If you have a launch in the diary, send us four things and we can come back with a quote that fits the room: the type of event, the date, the venue, and how many people will be in it. If you know what the product is and how it arrives, tell us that too.
Use the contact page or email hire@eventproductiongroup.co.uk. We work from Manchester, Liverpool and London with nationwide delivery, and our product launch page sets out the rest.






