It is easy to draw up an annual general meeting kit list that looks like a small conference’s. A screen, a lectern microphone, a laptop at the back. Then somebody demands a poll, or a member at the back asks to speak and no microphone is anywhere near them.
An annual general meeting, or AGM, is one of the few corporate events where the floor expects to speak and the vote has to be counted properly. Audio visual, or AV, is the screens and the sound. Lighting and staging travel beside it. AGM AV requirements start from those two facts, not from the size of the room.
In short
- An AGM has two jobs a conference does not: the floor has to be heard, and the vote has to be counted and recorded.
- A show of hands needs no equipment. A poll does, because in a company with share capital the votes go by shareholding, not by head.
- Most of the microphones belong in the room, not on the stage, and somebody has to be able to close a channel.
- A member joining remotely needs a way back into the room, which is a different build from a one-way stream.
What AGM AV requirements have to solve
A conference is built so that a few people at the front can be seen and heard by everyone else. An AGM runs the other way round for part of its length. The chair opens the floor, and anyone in the room may stand up and say something that goes into the minutes.
That changes the specification before it changes the kit list. We want to know what the event is for before we specify anything, because equipment chosen before the job is understood is the wrong equipment. An AGM and a 100-seat conference can want an identical screen and an identical loudspeaker system, and still need different microphone counts and a piece of kit the conference has never needed at all.
So two questions get settled first: how the vote will be taken, and how the meeting will be recorded. Everything else on the list follows from those two answers. Our conference production work starts the same way.
A show of hands and a poll need different kit
For a company, the Companies Act 2006 sets the default. Section 284 provides that on a vote on a resolution on a show of hands at a meeting, each member present in person has one vote. In a company with share capital, a poll goes by shareholding instead: every member has one vote in respect of each share held. Only one of those counts can be done by looking at the room.
A show of hands needs nothing beyond a chair who can see the back row. A poll has to tie every vote to a holding, and the count has to survive being questioned afterwards. That is the job voting handsets do. Lumi’s page for the IML Communicator handset gives a radio range of 150 metres, 1,500 handsets per base station and 6,000 across four base stations, with a unique identifier on every unit. The identifier is the point: a vote can be traced back to the handset it came from, which is what a count by eye cannot do.
Decide which of the two you are planning for before anyone books a room.
Most of the microphones belong in the room
The part of an AGM that catches people out is the floor. Shure’s Audio Systems Guide: Meetings and Conferences, by Crispin Tapia and Chris Lyons, says the most universally effective approach is to provide a microphone channel specifically for the audience, and that a single hanging microphone is generally not enough to capture audience questions and comments.
In practice that means handheld radio microphones carried to whoever is speaking, a fixed microphone position people walk to, or both. The same guide sets out the three to one rule, which is that the distance between open microphones should be at least three times the distance from each microphone to the nearest talker. It also recommends that whenever four or more microphones are used, there is some way of turning off the unused ones.
That last line is the one that matters at an AGM. A room full of members with every microphone open is how a meeting loses hold of itself. Somebody at the desk has to be able to close a channel, and the chair has to know that they can. Getting speech understood in a hard room is a separate problem, and we worked through it in gala dinner AV hire.
Read what the venue already has, then find the gap
20 Cavendish Square lists what is standard in every one of its meeting rooms: an ultra high definition screen, Yealink videoconferencing that works with Microsoft Teams and Zoom, and wireless microphones. Its Cowdray Hall package adds a 10,000 lumen ceiling-mounted projector, lumens being the measure of how much light it puts out, along with four repeater screens, a sound system, wireless and top-table microphones, a stage, a lectern and an on-site technician.
Read the same list for an AGM and two gaps show up. There is no voting system on it at all. And “wireless microphones” is a category, not a count. The count is what has to be agreed before the day.
One venue is one venue, so the useful habit is the reading, not that particular list. Ask what is installed and how many of each. Then ask what happens when the room needs more than the house kit holds. Those answers belong in the brief, alongside everything else in what your AV supplier needs from you.
A member joining remotely still has to be heard
A hybrid conference and a hybrid AGM are not the same build. A remote delegate at a conference watches. A remote member at an AGM may need to speak, and may need a vote that counts alongside the votes of the people sitting in the room. That is a return path, not a broadcast.
20 Cavendish Square specifies its hybrid package with three BirdDog pan, tilt and zoom cameras that follow and switch between speakers, plus a dedicated streaming technician. Cameras that follow a speaker are the easy half. The harder half is getting a remote voice back into the room clearly enough for the people at the back to hear it, and into the record.
The room still decides whether any of it works, and we set that argument out in conference live streaming setup. What an AGM adds on top is two-way participation and a vote. Settle early whether remote members may vote at all, and if they may, make the remote platform and the room report into the same count.
Frequently asked questions
Do we need voting handsets, or will a show of hands do?
It depends on which vote you are actually taking. A show of hands counts the people in the room and needs no equipment. If there is a realistic chance of a poll being demanded on the day, specify the handsets in advance, because you cannot source them while the room waits.
Can a member join the AGM remotely and still take part?
Whether they may is a question for your articles and your legal adviser. Whether they can is an AV question, and the answer is yes if the room is built for it. That means a camera and a stream out, a return audio path so a remote voice is heard by the people in the room, and a remote voting platform reporting into the same count as the handsets. Each of those is a separate line on the specification.
Sources
- Companies Act 2006, section 284 · legislation.gov.uk
- What is IML Communicator · Lumi Global
- Audio Systems Guide: Meetings and Conferences · Shure
- Audio visual technology · 20 Cavendish Square
If you are scoping an AGM, send us four things: the type of event, the date, the venue, and how many people will be in the room. With those we can tell you what the room already carries, what it does not, and whether a poll is something to plan for. We deliver nationwide.
Talk to us at eventproductiongroup.co.uk/contact or email hire@eventproductiongroup.co.uk.






